Stationary Melters -
MB Series - 1000°F Max.
Tilting Melters -
Zinc Melters - 1000°F Max.
Trough Melters -
DOWNLOAD OUR Electric Kettles and Melters BULLETIN
TRENT, Inc.
201 Leverington Ave.
Philadelphia, PA 19127
Toll Free: 800-544-TRENT
Phone: 215-482-5000
Fax: 215-482-9389
©2005 Trent, Inc.
PCT Series Maximum Temperature: 600°F / 316°C
LRT Series Maximum Temperature: 800°F / 427°C
These troughs all employ the same basic design regardless of their size or type of usage. The heavy duty construction with block type insulation on all sides and the bottom, incorporates TRENT Folded and Formed® radiant heater racks which radiate heat directly to the entire bottom of the trough, thus eliminating hot spot heating.
The vessel proper is fabricated from heavy gauge carbon steel with a flange which extends and wraps over the outer casing where it is rigidly fastened to prevent warping when under heat, but easily removable for maintenance. Control is achieved through any high-grade thermostatic type controller.
All troughs are suitable for bench or floor mounting.
STANDARD
FEATURES:
• Standard parts with little or no maintenance
required
• High-grade mineral board insulation
• Heavy-duty steel vessel fabricated using welded steel construction
• Wrap-around brim to
prevent material from seeping into
the heat
chamber
and superior direct radiant heat transfer to the vessel bottom
• Thermostat sensing thermocouple
OPTIONS:
•
Fused safety disconnect switch
• Switch
gear and control package
• Special purpose
accessories
