Stationary Melters -
MB Series - 1000°F Max.
Tilting Melters -
Zinc Melters - 1000°F Max.
Trough Melters -
DOWNLOAD OUR Electric Kettles and Melters BULLETIN
TRENT, Inc.
201 Leverington Ave.
Philadelphia, PA 19127
Toll Free: 800-544-TRENT
Phone: 215-482-5000
Fax: 215-482-9389
©2005 Trent, Inc.
Maximum Temperature: 1000°F / 538°C
Used to melt lead and babbitt.
TRENT Stationary Melting Pots - MB Series are fabricated from 1/2" thick steel or heavier using welded steel construction. TRENT Folded and Formed® heating elements are mounted to the inner casing walls with grooved porcelain retainers. The elements radiate uniform heat directly to the pot outer surface walls. This quickly and effectively transfers the heat to the material you are melting. This method prevents pot stresses and hot spotting that tends to shorten pot life.The pots are designed to provide full access for easy ladling or dipping. A control well opening at the bottom of the pot crucible effectively allows the control thermostat to sense the pot and material temperature to the maximum operating temperature of 1000°F. Lifting hooks on the pot permit easy removal of the pot for heat chamber inspection.
STANDARD
FEATURES:
• Standard parts with little or no maintenance
required
• High-grade mineral board insulation
• Heavy-duty steel pots fabricated from 1/2" steel or
heavier
using
welded steel construction
• Wrap-around brim to
prevent material from spilling into
the heat
chamber
• Easy access to the pot cavity
• Lifting lugs for easy pot removal
• TRENT Folded and Formed®
heating elements for long life
and
superior direct radiant heat transfer to the pot outer walls
• Thermostat sencing thermocouple
OPTIONS:
•
Fused safety disconnect switch
• Switch
gear and control package
• Special purpose accessories
