– Water Immersion Heaters
Screw Plug Type:
Series RA, RB
Series TRS, TS
Flange Type:
Series SWF
– Oil Immersion Heaters
Series TRO, TSO, TSOL
– Fintube Heaters
Series FO
DOWNLOAD OUR Immersion and Fintube Heaters BULLETIN
TRENT, Inc.
201 Leverington Ave.
Philadelphia, PA 19127
Toll Free: 800-544-TRENT
Phone: 215-482-5000
Fax: 215-482-9389
©2005 Trent, Inc.
Used for oil preheating, oil baths, wax and other heat transfer fluids.
TRENT Oil Immersion Heaters are designed to give years of trouble-free service when the tubes are completely covered with fluid, used on correct voltage and kept free of carbonization. These heaters listed as having watt densities (W.P.S.I.) of 16-22 are designed for use with heat transfer oil and have a maximum operating temperature of 550° F. Those heaters having lower W.P.S.I. are designed for use with Bunker C fuel oil preheaters and line and suction heaters with a maximum operating temperature of 250° F.All TRENT Oil Immersion Heaters are constructed with steel heads and tubing. The TRO, TSO and TSOL Series use a dialectric material to support the coiled heating elements and the heater tube is pressed to increase thermal conductivity.
