– Water
Immersion Heaters
Screw
Plug Type:
Series RA,
RB
Series TRS,
TS
Flange
Type:
Series
SWF
– Oil Immersion Heaters
Series TRO, TSO,
TSOL
– Fintube Heaters
Series FO
DOWNLOAD OUR Immersion and Fintube Heaters BULLETIN
TRENT, Inc.
201 Leverington
Ave.
Philadelphia, PA 19127
Toll Free: 800-544-TRENT
Phone:
215-482-5000
Fax: 215-482-9389
©2005 Trent, Inc.
Used for heating hot water tanks, water baths, glue pots.
There are seven TRENT Water Immersion Heater series based on size and electrical configuration. Each group is designed to give years of trouble-free service as long as they are completely covered with liquid and used on the correct voltage.TRENT Screw Plug Water Immersion Heaters are furnished with brass heads (National Pipe Thread - NPT) to which a brass or copper sheath is silver soldered. The helically coiled heating element is supported in the sheath/tube(s) by ceramic cores and/or the highest grade dielectric filler material material.
The RA and RB Series heaters come standard with a 4” octagonal outlet box. RA-Series heaters have a 1” pipe thread, and 1” copper tube. RB-Series heaters have a 1-1/4” pipe thread, and 1” or 1-1/4” diameter copper tubing. Both Series have ceramic cores which support the coiled heating element. A cap with BX connectors can be supplied upon request.
The TRS and TS Series use a dielectric material to support the coiled heating elements and the heater tubes are pressed to increase thermal conductivity. TRS Series heaters come standard with a 4” octagonal terminal box, a 2” pipe thread and are supplied with two (2) hairpin, copper tubes, nominally 1/2” in diameter. TS Series heaters are standard with a 6” square terminal box, a 2-1/2” pipe thread, and three (3) 1/2” diameter hairpin, copper tubes (designed for 240 and 480 volt, three phase).
The SWF Series have a flanged head rated either 150# or 300#. In the 3” size, three (3) hairpin tubular heaters are silver soldered to the flange. In the 5” size, the number of tubular heaters is increased to six (6), while in the 8” size the number in increased to 18 heaters. All heaters come with a standard type terminal box, large enough to accommodate the number of tubular elements mounted to the flange.
