Top Loading Ovens



	ELECTRIC OVENS BATCH Type Ovens – Horizontal Air Flow Front to Back COF – 650°F COFM – 850°F COFH – 1200°F COFVH – 1400°F – Horizontal Air Flow Side to Side HCC – 650°F – Vertical Air Flow M2-WOF – 650°F MTOF – 850°F HTOF – 1200°F – Gravity Convection Air Flow M2-WO – 650°F BELL TYPE Ovens – Radiant Heat RBO – 1000°F RBOF – 1000°F – Recirculating Air Flow BOF – 650°F BOFM – 850°F BOFH – 1200°F PIT TYPE Ovens – Radiant Heat RPO – 1000°F – Recirculating Air Flow VOFB – 850°F TOP LOADING Ovens TLO – 1200°F TLOD – 1000°F WALK-IN Ovens – Horizontal Air Flow ROFH – 450°F LOFH – 650°F LOFHM – 850°F – Vertical Air Flow ROFV – 450°F LOFV – 650°F LOFVM – 850°F UTILITY Ovens UOF – 400°F DOWNLOAD OUR ELECTRIC OVENS BULLETIN TRENT, Inc. 201 Leverington Ave. Philadelphia, PA 19127 Toll Free: 800-544-TRENT Phone: 215-482-5000 Fax: 215-482-9389 ©2005 Trent, Inc. privacy notice			Maximum Temperature: 1200 °F / 649°C TRENT TLO Series Top Loading Ovens are general purpose ovens with horizontal air recirculation to obtain work chamber temperature uniformity. The recirculating fan is located at one side of the chamber behind a baffle. The fan draws air around and through the work load horizontally with circulation from side to side. The air is then forced through ducts on both sides of the work chamber in which the TRENT Folded and Formed® heating elements are located. After passing over the heating elements, the heated air moves back into the work chamber at the side of the oven away from the fan. These Top Loading Ovens are rugged steel construction with 5" of high temperature insulation and come with a counterweighted hinged door for easy access to the work chamber. STANDARD FEATURES: • Standard parts with little or no maintenance required • Heavy duty steel exterior for industrial applications • Forced air circulation • Direct drive fan and motor • Aluminized steel interior & air flow baffles • Single counterweighted hinged doors are fully insulated and fitted with heat seal when closed • Explosion release door latch for secure closing • Adjustable 6" dampers for intake and exhaust • 5" of high temperature insulation • Reinforced floor to bear 1000 lb. distributed load • TRENT Folded and Formed® heater racks for long life and good control • Door switch to shut off fan and heaters when door is open • Floor mounted with 3" I-beam supports OPTIONS: • Switch gear and control package • Special purpose accessories