BATCH Type Ovens
– Horizontal Air Flow
Front to Back
COF – 650°F
COFM – 850°F
COFH – 1200°F
COFVH – 1400°F
– Horizontal Air Flow
Side to Side
HCC – 650°F
– Vertical Air Flow
M2-WOF – 650°F
MTOF – 850°F
HTOF – 1200°F
– Gravity Convection Air Flow
M2-WO – 650°F
BELL TYPE Ovens
– Radiant Heat
RBO – 1000°F
RBOF – 1000°F
– Recirculating Air Flow
BOF – 650°F
BOFM – 850°F
BOFH – 1200°F
PIT TYPE Ovens
– Radiant Heat
RPO – 1000°F
– Recirculating Air Flow
VOFB – 850°F
TOP LOADING Ovens
TLO – 1200°F
TLOD – 1000°F
WALK-IN Ovens
– Horizontal Air Flow
ROFH – 450°F
LOFH – 650°F
LOFHM – 850°F
– Vertical Air Flow
ROFV – 450°F
LOFV – 650°F
LOFVM – 850°F
UTILITY Ovens
UOF – 400°F
DOWNLOAD OUR
ELECTRIC OVENS BULLETIN
TRENT, Inc.
201 Leverington Ave.
Philadelphia, PA 19127
Toll Free: 800-544-TRENT
Phone: 215-482-5000
Fax: 215-482-9389
©2005 Trent, Inc.
Maximum Temperature: 1000 °F / 538°C
TRENT Pit Type Ovens are designed for those applications where radiant heat is required and temperature in the chamber is limited to 1000°F. Folded and Formed® heating elements are mounted to ceramic retainers which are in turn mounted to aluminized steel inner casing liner side walls. No heat is located in the bottom of the oven. These heating elements provide a blanket of radiant heat to surround the charge placed in the oven. The oven is constructed for direct floor mounting. Access to the work chamber is through the top opening which is closed by either a one-piece insulated lift-off cover or a split swinging insulated cover depending on oven size.
STANDARD FEATURES:
• Standard parts
with little or no maintenance required
• Heavy gauge reinforced steel
exterior for industrial applications
• Aluminized steel inner
casing
• One-piece lift-off cover or split-swing cover fully
insulated
• Mineral wool insulation for low outer casing
temperature
• TRENT Folded and Formed® heating elements for long life and
good temperature control
OPTIONS:
• Switch gear and
control package
• Special purpose accessories
