Low Temperature -
FFLP Series - 750°F / 399°C
High Temperature -
FFHP Series - 1350°F / 732°C
DOWNLOAD OUR Folded and Formed® HEATING UNITS BULLETIN
TRENT, Inc.
201 Leverington Ave.
Philadelphia, PA 19127
Toll Free: 800-544-TRENT
Phone: 215-482-5000
Fax: 215-482-9389
©2005 Trent, Inc.
Used for high temperature controlled heating of forced air circulation systems for annealing and tempering furnaces, heating ducts and other industrial heating equipment including baking and drying ovens.
TRENT FFHP PLUG
HEATERS are compact, pre-packaged units designed for quick
installation and long life with a maximum operating frame temperature of 1350°F
/ 732°C or furnace operating applications as high as 1200°F / 649°C. Multiple banks of TRENT Folded and Formed® heater racks are
assembled, wired and mounted in a self contained plug, complete with an insulated top plug with a gasketed, steel flange, 4-1/2" of insulation, handles for easy lifting and terminal box with leads mounted for electrical connections, all drilled and ready for quick installation.
The heater racks
consist of a fabricated stainless steel support frame with
pre-formed metal channels into which high-grade, refractory, porcelain retainers are inserted to support one to four levels of
three-tier high TRENT F&F®
heating elements. The unique F&F® heating elements ensure faster heat-up, faster cool-down and more efficient use
of heat to prolong the heater life. There are no screws or mechanical fasteners used in
the rack frame construction. The internal connections are all welded. The
anchor and terminal sections are welded to insure continuous
non-arching, electrical resistance path from terminal to terminal.
TRENT F&F® heating elements are rugged and
provide long life at high wattages and temperatures, if proper air
velocity is maintained parallel to the long dimension. This means more heat,
faster and with less energy expended, and faster cooling to
prolong element life. These benefits, coupled with the ease of
installation, make TRENT PLUG HEATERS as economical as they are efficient.
STANDARD
FEATURES:
• Standard parts with little or no maintenance
required
• Multiple banks of TRENT Folded and Formed® heater racks wired and
mounted on a horizontal plane to the flange, in a self-contained plug,
complete with terminal box with leads for electrical connections
• Insulated plug top with handles, flange and gasket, pre-drilled for mounting
FFHP Series
High Temperature Plug Heaters
