FOLDED and FORMED®
HEATING ELEMENTS
FOLDED & FORMED®
HEATER RACKS:
M2 Series -
11-3/4" long x 13-3/4" high -
M2-FFR, M2-FFRH
FS Series -
22-1/2" long x 13-3/4" high -
FSL, FSM, FSH
AS Series -
22-1/2" long x 24-1/2" high -
ASL, ASM, ASH
BS Series -
34-1/2" long x 16-3/4" high -
BSL, BSM, BSH
CS Series -
34-1/2" long x 30-1/2" high -
CSL, CSM, CSH
Air Duct Heaters -
DFF, DHFF
DOWNLOAD OUR Folded and Formed® HEATING UNITS BULLETIN
TRENT, Inc.
201 Leverington Ave.
Philadelphia, PA 19127
Toll Free: 800-544-TRENT
Phone: 215-482-5000
Fax: 215-482-9389
©2005 Trent, Inc.
Applications include heating ovens, furnaces (convection and radiant), kettles, tanks, grills, ducts, textile and chemical dryers, space heaters, infrared–far and near, etc.
TRENT
M2 Series heater racks consist of a fabricated
aluminized or alloy steel support frame with pre-formed metal channels into which high-grade,
refractory, slide-in, porcelain retainers are inserted to support three rows of one, two or three-tier high TRENT F&F® nickel-chrome, ribbon type heating elements. The overall rack frame dimensions for these racks are 13-3/4" high and 11-3/4" wide.
.
M2-FFR Racks have a maximum rack frame temperature of 750°F with an aluminized steel frame; M2-FFRH Racks have a maximum rack frame temperature of 1350°F with a stainless steel frame. There are no screws or mechanical fasteners used in the rack frame construction. The internal connections are all welded. The anchor and terminal sections are welded to insure continuous non-arching, electrical resistance path from terminal to terminal. TRENT
M2-FRR and M2-FFRH type heater racks are easily fastened to the interior of ovens. The F&F® heating elements are rugged and provide long life at high wattages and temperatures. This means more heat, faster
and with less energy expended. They also allow faster cooling to prolong
element life. These benefits, coupled with the ease of installation, make TRENT
F&F® heater racks as economical as they are efficient.
