ELECTRIC furnaces


Laboratory Furnaces
– Horizontal Tubular

 LFH Series– 2000°F
– Pit/Crucible 

LFV Series– 2000°F
– Bench Type box  

M2-DKR Series – 2500°F
HL Series - 2000°F 

Pot / TROUGH Furnaces

– Pot Type 

PF Series– 1700°F

– Trough Type 

TF/TFL Series– 1700°F  

Pit Furnaces 

– Radiant Heat
PT Series – 1850°F
 

– Vertical Air Flow
VR Series – 2000°F
 
M2-CAH Series– 1400°F

Bell Furnaces 

BA Series – 1850°F

Box Furnaces 

– Radiant Heat

H Series – 1850°F
HM Series – 1900°F

– Horizontal Air Flow
GF Series – 1400°F
  
GFH Series – 1750°F

– High Temperature Furnace
SCR Series – 2500°F
 

 

DOWNLOAD our ELECTRIC FURNACES bulletin



TRENT, Inc.
201 Leverington Ave.
Philadelphia, PA 19127
Toll Free: 800-544-TRENT
Phone: 215-482-5000
Fax: 215-482-9389

 

©2005 Trent, Inc.

 

privacy notice

 

 

 

Maximum Temperature: 1750°F / 954°C

The TRENT GFH Series Horizontal Air Recirculating Box Furnace is used in the metalworking and glass industry for annealing, heat treating, etc. at temperatures greater than 1400°F.

The furnace is equipped with a four-sided high alloy muffle and centrifugal flow type fan behind a guarded opening in the rear wall. The fan draws the air horizontally from front to back through the muffle work chamber, then returns the air to the front of the furnace through the annular space between the muffle outer wall and the furnace inner liner, where the heating elements are located.

STANDARD FEATURES:
• Standard parts with little or no maintenance required
• Firebrick chamber liner backed by slab type secondary insulation
• Horizontal air circulation, front to back
• High alloy muffle to withstand higher temperatures and act as an air

   recirculation channel and hearth, with two (2) removable shelves
• Vertical-lift, counterweighted door for quick access to the work

   chamber, including door gasket and toggle clamps for a tight seal

• Legs to bring the hearth 36" above floor level
TRENT Folded and Formed® heating elements supported by

   ceramic retainers that are keyed into the side walls, top and bottom of    the brick chamber

• Control thermocouple for the heat chamber

OPTIONS:
• Fused safety disconnect switch
• Switch gear and control p[ackage
• Swing-hinged door
• Air cylinder door mechanism
• Special purpose accessories